Milltronics PL-551 Información técnica descargar pdf (Pagina 374)

100

101

SECTION SEVEN - SAMPLE PROGRAMS

Explanation of EIA Program Sample 2A

N1 Tool change #1

N2 Rapid position to X-1 Y1; turns spindle on CW (3000 rpm)

N3 Calls tool #1's "H" offset and positions Z to .1; turns on coolant

N4 Feeds Z-.375 at 5 ipm

N5 Selects right cutter compensation, calls tool #1's "D" offset, and moves to X0 at

25 ipm.

Note: Cutter compensation will ramp on during this move.

N6 Line move to X0 Y-1.5

N7,N8 Are the X,Y center point of the first arc

N9 Radius of first arc

N10, N11 Are the X,Y center point of the second arc

N12 Radius of second arc

N13 Radius of tangent arc

N14 Tangent arc function

N15 First arc with end point

N16 Tangent arc with calculated center and end point

N17 CCW arc 1" radius using an XC4.4142 YC-1.5 and an end angle of 0°

N18 Line move to X5.4142 Y0

N19 Line move to X-1 Y0

N20 Turn off cutter compensation, move to X-1 Y1

Note: Cutter compensation will "ramp off" during this move.

N21 Rapid Z axis to .1, turns off coolant

N22 Turns off spindle

360

1 2 ... 369 370 371 372 373 374 375 376 377 378 379 ... 440 441

Comentarios a estos manuales

Sin comentarios

Milltronics PL-551 Información técnica Pagina 374

Comentarios a estos manuales

Relacionado con productos y manuales para No Milltronics PL-551